It is a simple, low cost, point level controller designed for detection of Conductive liquids, having low densities, high viscosities, containing solid Particles and interface between nonconductive and conductive liquids.
It comprises of a probe, wired to a level controller. The probe Holds one common “Mass Electrode" and one or multiple “Control Electrodes" depending upon the number of levels To be controlled. All the electrodes are suitably insulated to Avoid electrical bridging. The lengths of “Control Electrodes “Correspond to the height of preset level points to be Controlled and the length of the “Mass Electrode" is kept Slightly longer than the longest “Control Electrode". If tank Is conductive, it can be used as a “Mass Electrode". Then number of control electrodes equals number of preset Levels. Level controller houses sensing electronics consisting Of power supply and signal conditioning circuit which provide A “Low AC Voltage" across mass and control electrodes. On Liquid reaching preset level point electrical circuit gets Completed generating a signal which is amplified to actuate A relay, whose potential free contacts are available for, Subsequent operations. On “Level Falling" the circuit breaks, Cutting out the relay.
|Enclosure:||Cast Al, Weather Proof IP 65|
|Conduit connection:||Weather Proof-Brass 3⁄4" ET (S.C.) 3⁄4 “ET / 1⁄2" NPT (D.C)|
|Process connection:||ANSI, BS, DIN Standard Flange Flange size to suit No. of|
|Process Conn. MOC:||MS or SS304 or SS316|
|Probe type:||Solid (Upto4 meters) Suspended (Upto10 meters)|
|Electrode MOC:||SS304 or SS316|
|Electrode Insulation:||PVC (70°C), PTFE (200°C)|
|Control Electrodes:||One to Four|
|Signal Voltage:||6 VAC , 20mA|
|Resistance||40K (max) between Mass & Control Electrode|
|Max. Temperature:||70°C (with PVC insulation), 200°C with PTFE Insulation|
|Max. Test Pressure:||5Kg/cm 2 at ambient Temperature|