ULTRASONIC LEVEL TRANSMITTER

Home   /   ULTRASONIC LEVEL TRANSMITTER

ULTRSONIC LEVEL TRANSMITTER: YPL-ULT39

Introduction

Ultrasonic level transmitter is a non contact type level measurement transmitter for continuous Monitoring of liquids. It has an integral electronic Module for measuring level along with transceiver. ultrasonic is compact and easy to install measuring Device. ultrasonic is suitable for all non foaming and Non fuming liquid.

Principle

Ultrasonic works on the principle of Ultrasonic Sound waves. Sensors generate high frequency Sound waves and evaluate the echo which is Received back by the sensor. The device calculates The time interval between sending the signal and Receiving the echo to determine the distance to an Object, by the following formula: Distance = (Velocity of Sound x Time)/2. Velocity of sound changes with temperature andNature of medium.

Features

☆ Range 0.45 - 8 meters

☆ Automatic Temperature Compensation

☆ Fixed Target Suppression (10 Obstacles)

☆ Intelligent Noise Cancellation

☆ Beam Angle 10°

☆ Plug and Play

☆ Universal Power Supply AC/DC (on same terminal)

☆ Analog and Digital Output

☆ Area of Cross Section Display Output

☆ RS-485 ASCII Communication Protocol

☆ Accuracy 0.5% of max range*

☆ 50 KHz Operating Frequency

☆ IP-65 Approved Housing

Technical specification

Mechanical

Housing Cast Aluminum Weather Proof IP-65
Mounting Screw 2" BSP/NPT
Cable Entry 2 x PG 13.5
Flange Available as per Specification
Dimension 118 mm x 118 mm x 222 mm
Weight 1.5 kg
Display LCD 8 digit
Input Supply 90-265 VAC / 18-55 VDC (on same terminal)
Current 135mA max. @ 18 VDC with load
Consumption Output Analog- 4-20mA (Galvanic isolated / non-isolated)
Digital - RS-485 Custom ASCII
Switching- One Potential free Relay (Single point / pump control logic) Contact rating 6A , 230 VAC, 50 Hz for non-inductive load
Temperature 0°C to 60°C
Range Fail Safe Field Selectable
Setting Min: Fail Safe Low Max: Fail Safe High
Indication Sensor- Bi-color LED Red: Pulse, Green: Eco
Switching- Bi-color LED Red: Alarm, Green: Normal
Digital - Two Green LED for Data Transmit & Data Receive
Delay Setting Electronic Insert Covered and Uncovered 1-99 sec.

Sensor

Operating Frequency 50 KHz
Beam Angle 10°
Material PVDF
Temperature Range 0°C to 80°C
Blanking Zone 45 cm.