MICRO VALVE LEVEL CONTROLLER<

Home   /   MICRO VALVE LEVEL CONTROLLER

MICRO VALVE LEVEL CONTROLLER: YPL-MLC47

Introduction

This is a snap action float operated level controls, equipped with 3 way MICRO VALVE unit. Actuated by two adjustable York-type Pusher arms. Adjustable pusher arms permit the control range to Be adjusted easily and accurately to the range desired. With the liquid level is below the float the 3 way micro valve Will be in the low level position and will remain there until the float Rises to the pre-set high level. The micro valve then will reverse Position until the float drops to the pre-set low level position.

Installation & Operation

This model is equipped with flange/Groova Grooved coupling For mounting on to the vessel from side. The float is designed toPass through a 100mm tank nozzle. This model is equipped with a three way micro valve with three 1⁄4" NPT ports. The micro valve has standard working pressure of 2kg/cm2. Connection to the ports depend on the control action Desired.

Specification

Service crude oil/oil/condensate
Process Connection 4" standard flange of 150ASA, 300ASA & 600ASA
Process Connection Material carbon steel/SS304/SS316
Specific gravity 0.6 to 1.2
Temperature 1000C
Operating Pressure 15kg/cm2
Mounting side internal
Float size dia-90 mm x135 mm long
Supply Pressure 2kgcm2
Output 0-1kg/cm2 (proportional, Non linear, snap action)
Air Connection 1⁄4" NPT
Micro valve port 1⁄4" NPT
Flex Tube SS410/SS304/SS316
Differential 400mm (maximum) 150 mm (minimum)
Distance 415 mm
(Float center to flange face) Action Direct (increase in level increases output),
Reverse (increase in level decreases output)