INTERNAL BALL FLOAT LEVEL CONTROLLER

Home   /   INTERNAL BALL FLOAT LEVEL CONTROLLER

INTERNAL BALL FLOAT LEVEL CONTROLLER (PNEUMATIC): YPL-IBF48

Introduction

Internal ball float level controller has been designed and developed Especially for various types of liquid level control service used in Refineries gasoline, plant, industrial plants oil & gas separators And other similar installations, this unit is installed directly to the Flange opening on the side of the vacuum towers, soaking drum, Oil & gas separators fractionating column, all type of liquid containers Where a float operating inside of the tower can be used to a level Container are not recommended where turbulence or foaming on the Liquid surface occurs. For such installation, the external float cage type Level controller is recommended.

Principle of Operation

The operation of level controller is based on the principle that ball float Is determined by the fluid level variations actuating the rod through a System of levers. The controller operates on Archimedes principle. The Increase in level causes float to move up which is helped by counterweight For upward movement. The linkage operates plunger of pneumatic relay For changing output pressure which finally operates control valve to control Level of liquid. The maximum angle of the plug turn is 500 and corresponds To the level change within the range of 300mm. the pneumatic relay is Supplied with purified natural gas or air at a pressure of 1.1 to 2.5kg/cm2.

Specification

Service Crude oil (oil/gas interface)
Specific Gravity 0.7
Operating Pressure Upto40kg/cm2
Operating Temperature 1200C
Float SS304
Mounting side internal
Flange details A) 8"x150# ASA (B) 10"x150# ASA (C) 2" BSP thread
Flange material carbon steel
Supply 1.1 to 2.5kg/cm2 (clean, dry & oil free air or gas)
Output ON/OFF (proportional)
Action Direct (increase in level increases output)
Reverse (increase in level decreases output)
Float traveler provided
Float steam 606mm std. (other on request)
Packing Teflon
Pneumatic connection 1⁄4" NPT